It's all about testing
Contact Us

Name:
Phone:
E-mail:
Company:
Comment:

Allegro Packets

Products:
Allegro 200
The Allegro 200 is entry-level device. It's barely any bigger than a smartphone and weighs just 260g. It can analyze the data traffic of up to 50 PCs or servers and data rates of up to 1 GBit/s full duplex immediately after start-up inline or on the mirror port. It has 2x 1GBit/s ports for analyzing one link inline or on a TAP or for up to two mirror ports. Management is possible via an USB Ethernet adapter/wireless LAN adapter. An external hard disk or SSD can be connected via USB 3 as a packet ring buffer, enabling continuous recording of up to 2 GBit/s.

Allegro 1000
Allegro 1000 Series devices are low-cost entry-level versions for the 1G and 10G analysis of up to 10,000 servers. They allow an exact analysis of an entire corporate site. Depending on the network traffic, this is sufficient for a complete analysis of all data from the past few days, which can be retrieved in real time from the in-memory database. All devices can be upgraded with SFP+ ports, packet ring buffer, and additional in-memory database storage. The SFP+ ports allow an analysis of short- and long-range fiber connections. The Allegro 1000 series can also be installed transparently inline in the spanning tree or LACP trunks to analyze errors. An internal hard disk or NVMe SSD can be installed as a ring buffer. The NVMe SSD enables a continuous write speed of up to 10 GBit/s. External USB 3 HDDs or SSDs can also be connected.
Allegro 3000
The Allegro 3000 Series fronts the high-end Allegro devices. They are suitable for ISPs, large data centers and large enterprise networks for link analysis on nodes with a high load exceeding 10 GBit/s. The 3000 Series has a packet processing rate four times higher than the 1000 Series, enabling real-time and historical analysis for up to 40 GBit/s. The optional 25G (2x SFP28) and 40G/100G (2x QSFP28) expansions make the Allegro 3000 Series the analyzer to use on networks with 25, 40 or 100G connections. The Allegro 3000 Series has a 64GB in-memory database for large network analysis, which can be expanded to 128GB. The Allegro 3000 have an internal hard disk, NVMe SSD or external USB 3 HDD/SSD can be used as a ring buffer.
 
Homepage | About Us | Events & Seminars | Contact Us
CyberCity
CONTACT RDT

Name:
Phone:
E-mail:
Company:
Comment:
Go Back »