It's all about testing


Contact Us

Name:
Phone:
E-mail:
Company:
Comment:

ETA-Comm Technologies

Products:
  • ET-600 Physical Layer Switch - Desk top cross point switch, that uses relay technology to route signals between ports. This passive switch technology is designated for application such as laboratory and production line testing where users need a switch that will not change the signal being routed between test gear and DUT.

  • ET-2600 Physical Layer Switch - rack-mounted cross point switch, that uses relay technology to route signals between ports. This passive switch technology is designated for application such as laboratory and production line testing where users need a switch that will not change the signal being routed between test gear and DUT.

  • CPU Interface - The CPU Controller is based on a single board technology (SBC) running an embedded version of Linux software. User interact with the CTL board over a network connection using one of the three mechanisms.

  • T1/E1 Interface - The optional T1/E1 matrix interface can be installed in any slot numbered from 1 through 24 inclusive in the 26-slot chassis, and from 1 through 5 in the 6 slot-chassis, following the grouping outlines in the user manual for best usage.

  • POTS/xDSL Interface - The optional POTS/xDSL matrix interface can be installed in any slot numbered from 1 through 24 inclusive in the 26-slot chassis, and from 1 through 5 in the 6 slot-chassis, following the grouping outlines in the user manual for best usage.

  • 10/100 Ethernet Interface - The optional 10/100 Ethernet matrix interface can be installed in any slot numbered from 1 through 24 inclusive in the 26-slot chassis, and from 1 through 5 in the 6 slot-chassis, following the grouping outlines in the user manual for best usage.

  • 10/100/GigE Interface (PoE) - The optional 10/100/1GigE matrix interface can be installed in any slot numbered from 1 through 24 inclusive in the 26-slot chassis, and from 1 through 5 in the 6 slot-chassis, following the grouping outlines in the user manual for best usage.

  • Built In Software Control Panel - The software application is easy to use as 123. users can remotely access the control panel through the internet or intranet. The software is built in with multi-user capabilities.The unit is ready to use right out of the box, all applications are already loaded in the CPU.
 
Homepage | About Us | Events & Seminars | Contact Us
CyberCity
CONTACT RDT

Name:
Phone:
E-mail:
Company:
Comment:
Go Back »